Home  /  Stories  /  Milled vs 3D printed same-day crowns

Stories · Dr Amit Patel

Milled vs 3D printed same-day crowns: what's the difference?

A milled crown is carved from a solid block of ceramic. A 3D printed crown is built in layers from a liquid resin that contains ceramic particles. Both can be made in one visit, but milled ceramic crowns have up to 15 years of published clinical evidence, while printed crowns have around one to three.

Not every same-day crown is made the same way

Same-day crowns used to mean one thing. Today the phrase covers two very different ways of making a tooth.

If you are comparing practices, it helps to know which one you are being offered. This guide explains both in plain terms.

What is a milled crown?

A milled crown starts as a solid block of dental ceramic. The block is made in a factory under tightly controlled conditions, so it is dense and consistent all the way through.

We scan your tooth with a small camera. There are no impression trays. We design the crown on screen, and a milling unit carves it from the block in a matter of minutes.

This is the CEREC system. We then stain and glaze the crown by hand, fire it in a furnace, and bond it to your tooth in the same appointment.

What is a 3D printed crown?

A printed crown starts as a liquid. The printer hardens a light-sensitive resin one thin layer at a time, then the crown is washed and cured under strong light.

The resins used for permanent crowns contain ceramic particles, so they are often called “ceramic crowns”. In fact they are a hybrid: part resin, part ceramic. That is a different material from solid e.max or zirconia.

Printing is a real advance. It is fast, precise, and the equipment costs far less than a milling unit, which is one reason more practices now offer same-day crowns.

Milled vs printed crowns at a glance

Made from. Milled: a solid ceramic block, e.max or zirconia. Printed: a liquid resin with ceramic particles.

How it is made. Milled: carved from the block. Printed: built in layers, then light-cured.

Fit. Both are accurate, and comparable in laboratory tests.

Strength in laboratory tests. Milled ceramic is higher. Printed resin-based materials are lower.

Longest clinical studies. Milled: 10 to 15 years. Printed: around 1 to 3 years.

Made in one visit. Yes, for both.

What does the evidence say?

Milled e.max crowns made chairside have been followed for 15 years. In that study, about 8 in 10 crowns were still in place. Most of the losses were problems with the tooth underneath, with a single failure of the crown itself.

Printed crowns are newer, so the research is younger. Early trials are encouraging. In one one-year trial, printed partial crowns performed as well as milled ceramic ones.

A 2026 review summed it up fairly. Printed crowns fit well, but resin-based versions are less strong than milled ceramic, results on wear are mixed, and long-term clinical data remain sparse. Larger trials are under way, including one in the UK.

So printed crowns are not “bad”. We simply do not yet know how they behave at 10 or 15 years.

Why we choose to mill

We own both technologies. Our 3D printer is used every day for temporary crowns, surgical guides, models and trial smiles, where it is excellent.

For a crown you expect to keep for many years, we choose milled ceramic. We would rather rely on materials with a long, published track record than ask you to be part of finding out. You can read how a visit works on our same-day crowns page.

That is our position today. As longer studies on printed crowns are published, we will review it.

Experience matters as much as the machine

A crown is only as good as the tooth shaping, the design and the bonding behind it. Those are skills, and they come with repetition.

Our dentists have been making same-day milled crowns for many years. We design, stain and glaze each one ourselves, and several of us teach digital dentistry to other dentists.

Four questions to ask before a same-day crown

1. Is my crown milled or 3D printed?

2. What material is it made from?

3. How many years of clinical evidence does that material have?

4. How long has the dentist been making same-day crowns?

A good practice will be happy to answer all four.

Frequently asked questions

Are 3D printed crowns permanent?
Some printed resins are approved for permanent crowns. Their long-term clinical evidence is still limited to a few years.

Are milled crowns stronger than printed crowns?
In laboratory tests, solid milled ceramics are stronger than printed resin-based materials. How that translates over 10 years or more in the mouth is still being studied.

How long does a milled same-day crown last?
No crown lasts forever, and it depends on your tooth, bite and care. Published studies of milled e.max crowns show most still in place after 10 to 15 years.

Do same-day crowns cost more?
Fees vary by tooth and material. We give you a written estimate before anything begins.

Where can I get a milled same-day crown in central London?
Sardinia House is on Lincoln’s Inn Fields in Holborn. Call 020 7404 8600 to book a consultation. Our sister practice, Widegate House in Spitalfields, also makes milled same-day crowns.

Related reading: Do CEREC same-day crowns break? by Dr Shivan Dave.

Disclosure: Dr Amit Patel is a Key Opinion Leader for Dentsply Sirona, which makes the CEREC system.

The one thing to remember

"Same-day crown" no longer describes one thing. Ask whether yours will be milled from solid ceramic or 3D printed from resin, what it is made of, and how many years of clinical evidence stand behind that material.

Related treatments

Book an appointment

Known by name, from your first visit to your last.

Book online at any time, or call and speak to someone who will remember you.

Call020 7404 8600
WhatsApp07376 917992
Emailinfo@sardiniadental.com
OpenMon–Thu from 8am, late on Wednesdays, Fri from 8.30am
Nearest stationHolborn, around 5 min
Part ofDental Group